Wind Farm Tools & Equipment

Build up and hard surfacing of coring augers for the early geo-tech work.
We produced Bolt cage support channels at the rate of 24 per day for the foundation portion of the project.
These aluminum adapter plates were made to facilitate a change in anemometers. LMI Welding milled, drilled, tapped, counter bored and put a nice finish on these brackets that measure less than 2 ˝  inches square.
Projects like these FAA Beacon brackets originated from engineers blueprints and were cut on our CNC plasma table, formed and galvanized. We built these for the Glacier Wind Farm and wind farms in Illinois, Oklahoma, and Nebraska. We follow all the quality control measures required by the tower manufacturer along with the necessary job travelers, material and galvanizing certs etc. to ensure a top quality product start to finish.
Projects like these FAA Beacon brackets originated from engineers blueprints and were cut on our CNC plasma table, formed and galvanized. We built these for the Glacier Wind Farm and wind farms in Illinois, Oklahoma, and Nebraska. We follow all the quality control measures required by the tower manufacturer along with the necessary job travelers, material and galvanizing certs etc. to ensure a top quality product start to finish.
Projects like these FAA Beacon brackets originated from engineers blueprints and were cut on our CNC plasma table, formed and galvanized. We built these for the Glacier Wind Farm and wind farms in Illinois, Oklahoma, and Nebraska. We follow all the quality control measures required by the tower manufacturer along with the necessary job travelers, material and galvanizing certs etc. to ensure a top quality product start to finish.
We work on site on many projects to develop just the product the crews are looking for.  Here we are working to perfect steel grout hoppers for pouring grout in the internal and external grout forms. The finished product was powder coated to protect it against the harsh epoxy chemicals.
We work on site on many projects to develop just the product the crews are looking for.  Here we are working to perfect steel grout hoppers for pouring grout in the internal and external grout forms. The finished product was powder coated to protect it against the harsh epoxy chemicals.
We work on site on many projects to develop just the product the crews are looking for.  Here we are working to perfect steel grout hoppers for pouring grout in the internal and external grout forms. The finished product was powder coated to protect it against the harsh epoxy chemicals.
The job called for some large hand tools to make an emergency repair. We milled out a large metric allen wrench for one of the tools and cut out the other wrench, case hardened it and clear coated them to make a durable and long lasting tool set.
The job called for some large hand tools to make an emergency repair. We milled out a large metric allen wrench for one of the tools and cut out the other wrench, case hardened it and clear coated them to make a durable and long lasting tool set.
A tower leveling beam. From a sketch in a spiral notebook to the top of the base section in just a few hours.
Some of our LMI Welding crews ready to work up-tower on your repairs or fabrication projects.
Some of our LMI Welding crews ready to work up-tower on your repairs or fabrication projects.
Some of our LMI Welding crews ready to work up-tower on your repairs or fabrication projects.
A Blade Angle Gauge we imprinted and then laminated on galvanized steel for the commissioning of the towers.
Ladder alignment tools fabricated from scratch using a broken/damaged one for a pattern. LMI Welding fabricated these “Hootikaj sockets” for running the nuts down onto the tower pedestal bolts.
Ladder alignment tools fabricated from scratch using a broken/damaged one for a pattern. LMI Welding fabricated these “Hootikaj sockets” for running the nuts down onto the tower pedestal bolts.
The tower manufacturer gave us a phone call describing these 20 degree indicators for flange bolts. We fabricated them as they described, then gave them one we designed as a “new and improved” model and had them delivered to them and ready to go to work in a very short time.
Copper transformer connections were formed and drilled to specifications and the project never slowed down.
LMI Welding used its’ skill on the lathe and milling machine to turn down these Hi-Torque test inserts.
Door stop brackets fabricated by LMI Welding Inc.
Door stop brackets fabricated by LMI Welding Inc.
Custom hose and belt racks
Toe Kicks
Light brackets
Wire alignment pieces
Overhead protection installed on ATV
Fabricating and painting the Bollards
Rated  Aluminum load baskets
Custom hose and belt racks

 
HOME l HI-RIDER l KITS FOR SUPERCREW & SUPERCAB l CONTACT